How does Sync2 connect to my network?
- Standard Client Mode (hardwired to the network)
- Plug the Sync2into your network using the onboard LAN port.
- Your network will assign the Sync2 an IP address.
- You can also assign a static IP address to the unit from the admin panel.
- Users simply connect to your internal network as usual and launch the software.
- AP Client Mode (wireless to the network)
- Open a browser, navigate to the IP address of the unit, and access the admin panel.
- Select WiFi setup from the list on the left, enable Wireless LAN, and select Station as the mode.
- Press the scan button.
- Select your SSID from the list, select the appropriate encryption and enter the password.
- The Sync2 unit will reboot, then display an IP address from your network.
- Users simply connect to your internal network as usual and launch the software.
- HotSpot Mode (standalone - no connection to the network)
- Open a browser, navigate to the IP address of the unit, and access the admin panel.
- Select WiFi setup from the list on the left, enable Wireless LAN, and select Access Point.
- Name the SSID, enable and select the appropriate encryption and create a password.
- The Sync2 unit will reboot and display the default IP address (192.168.100.10).
- Users simply connect directly to this WiFi signal and launch the software.